|
Inconel 718 Welding Wire Specification
Specification
| Specifications |
| ASTM B637 UNS N07718 Wires Dimensions |
ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| AMS 5832E Wires Length |
100 mm TO 6000 mm, customizable |
| Alloy 718 Wires Diameter |
10 mm To 100 mm or as per client requirement |
| 2.4668 Inconel 718 Wires Main Types |
| Filler, Coil, Electrode, Welding, Knitted Wire mesh, filter mesh, mig, tig, spring |
|
| Inconel 2.4668 Alloy 718 Wires Density |
8.89 g/cm3 |
| Ultimate Strength (≥ MPa) |
580-750 |
| Din 2.4668 Wires Resistance (μΩ.m) |
as standard |
| ASME SB 637 UNS N07718 Wires Elongation (≥ %) |
28-30 |
| Surface |
Polished bright, Smooth |
|
Nickel Alloy 718 Wires Technique
|
Cold Rolled, hot rolled |
| Alloy 718 UNS N07718 Wires Condition |
M, Y, 1/2Hard |
| Tempers |
Tempers range from dead soft annealed to ultra-spring temper |
| Inconel 718 welded wire mesh |
Roll Width: 24inch, 36inch, 1Metre, 48inch, 72inch, or 84inch
Roll Length: 100feet or 150feet |
| ASTM B637 UNS N07718 wire mesh weaving methods |
plain weave, twill weave, Dutch weave |
| Offered in a wide range of packages including |
- Spool
- Reel
- Coil
- Bobbin
- Carrier
- Custom packaging provided from as low as 1lb to 200lb tapered plastics
|
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
|---|
AMS 5832E Wire Available in Stock
| Alloy |
Product form |
Dimension |
| UNS N07718 (53Ni/19Fe/5Nb/3Mo |
TIG-welding Wires |
Dia=1.2 x 915 mm, 2 kg/pack |
| UNS N07718 (53Ni/19Fe/5Nb/3Mo) |
MIG-welding Wires |
Dia=1.2 mm, 13.61 kg/spool |
| UNS N07718 (53Ni/19Fe/5Nb/3Mo |
TIG-welding Wires |
Dia=1.6 x 915 mm, 2 kg/pack |
| UNS N07718 AMS 5832E |
TIG-welding Wires |
Dia=2.4 x 914.4 mm, 4.54 kg/pack |
Alloy 718 Bright Wire Applications
- Offshore rigs and onshore petrochemical plants and oil refineries
- Energy (Gas and Electricity), Defence, and Nuclear industries
- Paper and pulp plant
- Process plant for pharmaceuticals, surfactants, chemicals and additives.
- Marine and Shipbuilding
- Anywhere there is corrosion/high or low temperature/pressure
| 2.4668 Inconel 718 Wire Mesh Size |
Inconel 2.4668 Alloy 718 Wire Gauge Diameter |
| In MM |
In Inch |
BWG No. |
MM |
| 6.4mm |
1/4Inch |
BWG24-22 |
0.56mm- 0.71mm |
| 9.5mm |
3/8Inch |
BWG23-19 |
0.64mm - 1.07mm |
| 12.7mm |
1/2Inch |
BWG22-16 |
0.71mm - 1.65mm |
| 15.9mm |
5/8Inch |
BWG21-16 |
0.81mm - 1.65mm |
| 19.1mm |
3/4Inch |
BWG21-16 |
0.81mm - 1.65mm |
| 25.4x 12.7mm |
1 x 1/2Inch |
BWG21-16 |
0.81mm - 1.65mm |
| 25.4mm |
1Inch |
BWG21-14 |
0.81mm - 2.11mm |
| 38.1mm |
1 1/2Inch |
BWG19-14 |
1.07mm - 2.11mm |
| 25.4mm x 50.8mm |
1 x 2Inch |
BWG17-14 |
1.47mm - 2.11mm |
| 50.8mm |
2Inch |
BWG16-12 |
1.65mm - 2.77mm |
| 50.8mm to 305mm |
2 to 12Inch |
At Request |
ASTM B637 UNS N07718 Wire Types available in store
|
 4 Mesh .047" Inconel 718 Woven Wire Cloth
|
|
|
 6 Mesh .035" ASTM B637 UNS N07718 Woven Wire Cloth
|
|
|
 6 Mesh .063" AMS 5832E Woven Wire Cloth
|
|
|
 8 Mesh .028" Alloy 718 Woven Wire Cloth
|
|
|
 8 Mesh .035" 2.4668 Inconel 718 Woven Wire Cloth
|
|
|
 10 Mesh .025" Inconel 2.4668 Alloy 718 Woven Wire Cloth
|
|
|
 10 Mesh .035" Din 2.4668 Woven Wire Cloth
|
|
|
 12 Mesh .028" ASME SB 637 UNS N07718 Woven Wire Cloth
|
|
|
Alloy 718 Wire Chemical Composition
| Grade |
C |
Mn |
Si |
Cu |
S |
Cr |
Fe |
Ni |
N |
| Inconel 718 |
0.08 max |
0.35 max |
0.35 max |
0.30 max |
0.15 max |
17.0-21.0 |
– |
50.0-55.0 |
– |
| Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
| 8.2 g/cm3 |
1350 °C (2460 °F) |
Psi – 1,35,000 , MPa – 930 |
Psi – 75,000 , MPa – 482 |
45 % |
- Density: 0.296 lb/in3, (8.19 g/cm3)
- Modulus of Elasticity (E):
At 70°F (20°C): 29.0 x 103 ksi (200 GPa)
- Modulus of Rigidity (G):
At 70°F (20°C): 11.6 x 103 ksi (80 GPa)
- Coefficient of Expansion:
7.7 µin/in.-°F (70°F to 600°F)
13.9 µm/m-°C (20°C to 300°C)
- Inconel 718 Wire Electrical Resistivity: 47.5 µΩ.in, (121 µΩ.cm)
- Inconel 718 Wire Thermal Conductivity: 79 Btu-in/ft2hr-°F, (11.4 W/m-K)
Typical Mechanical Properties of Inconel 718 Wire–Spring Applications
Annealed
- Heat Treatment: 1800°F (980°C)
- Tensile Strength: 115 - 145 ksi; (790-1000 MPa)
- Suggested Operating Conditions: -330°F to 1200°F (-200°C to 650°C)
Spring Temper
- Tensile Strength: 190 – 220 ksi; (1310 – 1515 MPa)
- Suggested Operating Conditions: -330°F to 1200°F (-200°C to 650°C)
Spring Temper + Aged
- Heat Treatment: After spring coiling. Age: 1325°F (720°C) for 8 hours, furnace cool to 1150°F and hold for a total ageing time of 18 hours.
- Tensile Strength: 220 ksi minimum; (1515 MPa)
- Suggested Operating Conditions: -330°F to 1200°F (-200°C to 650°C)
Inconel Alloy 718 Heat Resisting Alloy Wire - Standard Products
- SB 637 UNS N07718 - Heat Resisting Alloy Wire: Diameter:0.5mm, Temper:Annealed
- SB 637 UNS N07718 - Heat Resisting Alloy Wire: Diameter:0.6mm, Temper: Annealed
- Inconel® alloy 718 - Heat Resisting Alloy Wire: Diameter:0.7mm, Temper: Annealed
- Inconel® alloy 718 - Heat Resisting Alloy Wire: Diameter:0.8mm, Temper: Annealed
- SB 637 UNS N07718 - Heat Resisting Alloy Wire: Diameter:1.0mm, Temper: Annealed
- SB 637 UNS N07718 - Heat Resisting Alloy Wire: Diameter:1.2mm, Temper: Annealed
Equivalent Grades of Inconel 2.4668 Alloy 718 Wire
| STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
| Inconel 718 |
2.4668 |
N07718 |
NCF 718 |
– |
– |
– |
– |
Features and benefits of Nickel Alloy 718 wires
- Good electric and thermal conduction
- High-intensity and elastic module
- Corrosion and wear resistance
- Uniform and beautiful surface condition
- Anti-static, radiation protection
- long life etc.
Tolerances
|
Diameter
|
0.03
|
>0.03-0.10
|
>0.10-0.40
|
>0.40-0.80
|
>0.80-1.20
|
>1.20-2.00
|
|
Tolerance
|
±0.0025
|
±0.005
|
±0.006
|
±0.013
|
±0.02
|
±0.03
|
Standard price
| Length | 1 Reel Inconel alloy 718 Wire Price |
|---|
| 5 m |
USD $ 122 |
| 10 m |
USD $ 143 |
| 20 m |
USD $ 164 |
| 50 m |
USD $ 207 |
| 100 m |
USD $ 257 |
| Inconel alloy 718 Wire Price per Kg: Pipeline & Petrochemical Dia 0.025 mm High Purity 718 Inconel Wire in Coil: US $15.00-$45.00 / Kilogram |
ASME SB 637 UNS N07718 Wire Size Chart
- 0.20mm (32AWG)
- 0.25mm (30AWG)
- 0.28mm (29AWG)
- 0.30mm (28/29AWG)
- 0.32mm (28AWG)
- 0.35mm (27AWG)
- 0.40mm (26AWG)
The Nickel Alloy 718 wire can be provided in three different lengths
- 10m reel
- 25m reel
- 50m reel
|
