|
INCOLOY® Filler Metal 65 (ERNiFeCr-1)
Specification
INCOLOY Filler Metal 65 is used for gas-tungsten-arc welding of INCOLOY alloy 825 and other nickel-iron-chromium-molybdenum-copper alloys of similar composition. The weld metal is highly corrosion resistant, particularly in reducing chemicals such as sulfuric and phosphoric acids. INCOLOY Filler Metal 65 can also be used for depositing overlays on carbon and low alloy steels.
Specification Chart of INCOLOY® Filler Metal 65
| Specifications |
AWS A5.14 ERNiFeCr-1 (UNS N08065) |
| AWS |
AWS A5.14 |
| Class |
ERNiFeCr-1 |
| Available Diameters |
- 0.030" (0.8mm)
- 0.035" (0.9mm)
- 0.040" (1.0mm)
- 0.045" (1.14mm)
- 0.047" (1.2mm)
- 0.062" (1.6mm)
- 0.093" (2.4mm)
- 0.125" (3.2mm)
|
| Length |
|
| Packaging (kg) |
TIG
- 0.062" (1.6mm) x 39" (1000mm) : 5.0 Kg x Pack
- 0.093" (2.4mm) x 39" (1000mm) : 5.0 Kg x Pack
MIG
- 0.035" (0.9mm): 15Kg x Spool
- 0.047" (1.2mm): 15Kg x Spool
|
| Key Features |
- Used for welding of nickel-chromium-molybdenum- copper alloys.
- Also can be used to overlay cladding where a similar chemical composition is required.
|
INCOLOY® Filler Metal 65 Details
|
 825 (65) TIG A5.14 ERNiFeCr-1
|
|
|
 825 (65) MIG A5.14 ERNiFeCr-1
|
|
|
 825 (65) MIG A5.14 ERNiFeCr-1
|
|
Application of INCOLOY® Filler Metal 65
Used for welding of nickel-chromium-molybdenum-copper alloys.
INCOLOY® Filler Metal 65 Chemical Composition
|
AWS A5.14
ERNiFeCr-1
UNS N08065
|
Cr |
Cu |
Nb + Ta
|
S |
Ni + Co
|
C
|
Mn
|
Si
|
P
|
19.5- 23.5
|
1.5 - 3.0
|
--
|
0.03 max
|
38.0 - 46.0
|
0.05 max
|
1.0 max
|
0.50 max
|
0.03 max
|
| Fe |
Zr |
Ti |
Co |
Mo |
AI |
B |
W |
Other |
22.0 max
|
--
|
0.60 - 1.20
|
--
|
2.50 - 3.50
|
0.20 max
|
--
|
--
|
0.50 max |
- Ni = Nickel
- Cr = Chromium
- Mn = Manganese
- TA = Tantalum
- Nb = Niobium
- Fe = Iron
- Ti = Titanium
- Si = Silicon
- Cu = Copper
- C = Carbon
- P = Phosphorus
- S = Sulfur
- Co = Cobalt
For more symbols click here
Mechanical Properties of INCOLOY® Filler Metal 65
| |
Tensile Strength MPa (ksi) |
Yield Strength MPa (ksi)
|
Elongation % |
| AWS Requirements |
80 Ksi / 550 MPa typical
|
Not Specified |
Not Specified |
| Typical Performance |
80Ksi / 550 MPa |
Not Specified |
25% |
| Density g/cm3 |
Melting Point ℃ |
Electrical Resistivity μΩ-m |
Permeability at 70°F (21°C) and 200 oersted (15.9 kA/m) |
| 8.14 g/cm3 |
2500 - 2550 ℃ |
-- |
1.005 |
Typical Welding Parameters of INCOLOY® Filler Metal 65
| Diameter |
Process |
Volt |
Amps
|
Gas |
| 1/16" |
1.6mm |
TIG |
14 - 18
|
90 - 130
|
100% Argon |
| 3/32" |
2.4mm |
TIG |
15 - 20
|
120 - 175
|
| 1/8" |
3.2mm |
TIG |
15 - 20 |
150 - 220
|
| .035" |
0.9mm |
MIG |
26 - 29
|
150 - 190
|
75% Argon + 25% Helium |
| .047" |
1.2mm |
MIG |
28 - 32 |
180 - 220 |
75% Argon + 25% Helium |
| 1/16" |
1.6mm |
MIG |
29 -33
|
200 - 250 |
75% Argon + 25% Helium |
Our Pricing list of INCOLOY® Filler Metal 65
| Our Part No. |
ERNiFeCr-1 Filler Metal 65 Details List |
ERNiFeCr-1 Filler Metal 65 Price |
| M6512S |
825 (65) MIG - AWS A5.14 ERNiFeCr-1 / 0.047" (1.20mm) Od - (15 Kg per spool) For welding alloy 825
|
- US $ 178.00 x Kilogram
- US $ 2,670.00 x Spool
|
| T6524S |
825 (65) TIG - AWS A5.14 ERNiFeCr-1 / 0.093" (2.40mm) Od - Lenght 39" (1000mm) (4.54 Kg per Pack) For welding alloy 617
|
- US $ 178.00 x Kilogram
- US $ 808.12 x Pack
|
Conclusion
ERNiFeCr-1 is used for TIG or MIG welding of Incoloy 825 and other nickel-chromium-molybdenum-copper alloys. Incoloy Filler Metal 65 can be also used to overlay cladding where a similar chemical composition is required.
INCOLOY® Filler Metal 65 suppliers
|
