bennypass.com - ENiCrMo4T1-1/T1-4 Stoody C276-T1

ENiCrMo4T1-1/T1-4 Stoody C276-T1

Specification

Pinnacle Alloys ENiCrMo4T1-1/4 has a nominal composition (wt.-%) of 57 Ni, 16 Mo, 15.5 Cr, 5.5 Fe, 4 W, with low carbon. Electrodes of this classification are used for welding low-carbon nickel-chromium-molybdenum alloys to steel or other nickel-base alloys, and for clad side of joints in steel clad with low-carbon nickel-chromium-molybdenum alloys. Typical specifications for the nickel-chromium-molybdenum base metals are ASTM B574, B575, B619, B622, and B626, all of which have a UNS Number of N10276. Pinnacle Alloys ENiCrMo4T1-1/4 has excellent resistance to crevice corrosion and pitting. It is used in pipelines, pressure vessels, chemical processing plants, offshore oil and gas facilities, and marine environments. It delivers superb performance characteristics in all positions, has little spatter, and easy-to-remove slag. Minimal weaving is required to achieve a flat, well-washed bead.

Specification Chart of ENiCrMo4T1-1/T1-4 Stoody C276-T1

Specifications	AWS 5.34 ENiCrMo4T1-1/4 (UNS W80276)
AWS	AWS A5.34
Class	ENiCrMo4T1-1/4
Available Diameters	0.047" (1.20mm) 0.062" (1.6mm)
Wire Ext	1/2 in (12mm)
Process and Packaging (kg)	FCAW 0.047" (1.20mm) 15 Kg x Spool 0.062" (1.6mm) 15 Kg x Spool
Key Features	SelectAlloy C276-AP provides superb performance characteristics in all positions, using either argon + 25% CO2 or 100% CO2 shielding gas. Out-of-position deposition rates are significantly higher than those achieved with solid wires or covered electrodes. Flat, well-washed beads can be achieved with minimal weaving. Spatter is very low and slag peeling is excellent, minimizing cleanup.

ENiCrMo4T1-1/T1-4 Stoody C276-T1 Details

165L C276-T1 A5.34 ENiCrMo4T1-1/4

61mig1 C276-T1 A5.34 ENiCrMo4T1-1/4

Application Chart of ENiCrMo4T1-1/T1-4 Stoody C276-T1

This filler metal is frequently used for welding the clad side of joints on steel in the chemical, petrochemical and petroleum industries. Alloy C276 offers excellent resistance to a wide range of chemicals including the corrosive effects of wet chlorine gas, hypochlorite and chlorine dioxide solutions. Other uses would include hot contaminated mineral acids, solvents, solutions (organic and inorganic) contaminated by chlorine or chlorides, dry chlorine acetic or ferric acids, seawater and brine solutions

ENiCrMo4T1-1/T1-4 Stoody C276-T1Chemical Composition

AWS A5.34 ENiCrMo4T1-1/T1-4 UNS W80276	Cr	Cu	Nb	S	Ni	C	Mn	Si	P
	14.5 - 16.5	0.50 max	--	0.03 max	Remainder	0.02 max	1.0	0.20	0.03 max
	Fe	Zr	Ti	Co	Mo	AI	V	W	Other
	4.0 - 7.0	--	--	2.50	15.0 - 17.0	--	0.35	3.0 - 4.5	--

Ni = Nickel
Cr = Chromium
Mn = Manganese
TA = Tantalum
Nb = Niobium
Fe = Iron
Ti = Titanium
Si = Silicon
Cu = Copper
C = Carbon
P = Phosphorus
S = Sulfur
Co = Cobalt

For more symbols click here

Mechanical Properties of ENiCrMo4T1-1/T1-4 Stoody C276-T1

	Tensile Strength MPa (ksi)	Yield Strength MPa (ksi)	Elongation %
AWS Requirements	100 Ksi / 690 MPa typical	108 Ksi / 740 MPa typical	25%
Typical Performance	108Ksi / 740 MPa	64Ksi / 440 MPa	42%
Density g/cm3	Melting Point ℃	Electrical Resistivity μΩ-m	Permeability at 70°F (21°C) and 200 oersted (15.9 kA/m)
--	--	--	--

Typical Welding Parameters of ENiCrMo4T1-1/T1-4 Stoody C276-T1

Diameter		Process	Wire Feed Speed (ipm)	Wire Ext.	Volt	Amps	Shielding Gas
.047"	1.2mm	FCAW	290-400	½ in. (12mm)	25 - 26	150 - 200	100% CO2; 75-80% Ar/ balance CO2
1/16"	1.6mm	FCAW	190-275	½ in. (12mm)	26 - 27	200 - 250	100% CO2; 75-80% Ar/ balance CO2

Our Pricing list of ENiCrMo4T1-1/T1-4 Stoody C276-T1

Our Part No.	ENiCrMo4T1-1/4 Flux Cored Wire C276-T1 Details List	ENiCrMo4T1-1/4 Flux Cored Wire C276-T1 Price
M27612S14	C276-T1- AWS A5.34 ENiCrMo4T1-1/4 / 0.047" (1.20mm) Spool Dimension 300mm (15 Kg per spool)	only for request
M27612S15	C276-T1- AWS A5.34 ENiCr3T1-1/4 / 0.062" (1.60mm) Spool Dimension 300mm (15 Kg per spool)	only for request

Conclusion

In conclusion, Stoody C276-T1 is a gas-shielded flux-cored wire that can be used for welding in all positions using 100% CO2 or Argon/CO2 mixtures. The wire possesses excellent weldability and can be used in a wide variety of similar and dissimilar welding and cladding applications.

ENiCrMo4T1-1/T1-4 Stoody C276-T1 Wire suppliers

About

Our Services

Marketing Materials

Marketing Materials1