Arm robot CROBOTP CRO-RH14-10-W (Latvia)

Description

• The wingspan is 1.4 meters. The design is highly compact and offers a choice of ground or inverted installations.
• Large working space, fast running speed and high repeatability. It is suitable for welding, spraying, loading and unloading, handling, sorting, assembly and other applications.
• Configure a safety emergency stop board independent of the control system, adopt a safe relay circuit, and provide a dual-circuit emergency stop to ensure the reliability of the emergency stop.
• The main cable is a high-flexible robot-specific cable.
• Built-in three-phase transformer, 380V and 200V for isolation, the power supply is more stable. Built-in three-phase filter to improve EMC and EMI performance
• The main body provides a double-circuit air pipe to meet the needs of welding and handling.
• The 6-axis inner hole has an inner diameter of 46mm, which can meet the installation requirements of water-cooled guns and bellow guns.
• Built-in high-flex welding cable.

Characteristics

 Click here for the datasheet

Device Characteristics/Functional features

• Load capacity up to 10kg, reach up to 1.4 m. Can be placed on the floor or optionally.
• The payload is 10kg. The arm span is 1.4 meters. It can be installed on the ground or upside down flexibly.
• Large working area and fast-moving speed, suitable for welding, spraying, loading and unloading, arranging, assembling... and other applications.
• With a large working space and fast running speed, it is suitable for welding spaying loading and unloading, handling sorting, assembling and other applications.
• The circuit board used has an emergency stop function independent of the controller and a safety relay circuit that creates an emergency stop circuit to ensure the stopping ability of the device.
• The safety emergency stop board is independent of the controller, and the safety relay circuit is adapted to provide a double-circuit emergency stop to ensure the reliability of the emergency stop.
• The cable used in the machine body is a special cable used for robots. Integrated 3-phase transformer, 380V/220V helps provide stable power.
• The robot body cables are made of special cables for flexible robots. Built-in three-phase transformer, 380V and 200V isolation, more stable power supply.
• Integrated 3-phase filtering helps improve the performance of the EMC/EMI unit.
• Built-in three-phase filters can effectively improve the performance of EMC and EMI.
• The robot body is equipped with dual-type air pipes to meet welding and support requirements.
• The robot body is with dual-circuit gas pipe and meets welding and handling requirements

For more details, see the video below

Robot installation must be away from flammable or corrosive liquids or gases, electrical sources of interference