Arm robot- CROBOTP - CRP-RH18-20-W (Latvia)

Description

• Large working space, fast running speed and high repeatability. It is suitable for welding, spraying, loading and unloading, handling, sorting, assembly and other applications.
• Configure a safety emergency stop board independent of the control system, adopt a safe relay circuit, and provide a dual-circuit emergency stop to ensure the reliability of the emergency stop.
• The main cable is a high-flexible robot-specific cable.
• Built-in three-phase transformer, 380V and 200V for isolation, the power supply is more stable. Built-in three-phase filter to improve EMC and EMI performance.
• The main body provides a double-circuit air pipe to meet the needs of welding and handling.
• The 6-axis inner hole has an inner diameter of 46mm, which can meet the installation requirements of water-cooled guns and bellow guns.
• Built-in high-flex welding cable.

Characteristics

 Click here for the datasheet

Device Characteristics/Functional features

This brand new CRP-RH18-20-W Robot is a reliable, flexible 6-axis robot and very competitively priced. It comes with an integrated MEGMEET Ehave 350AR welding unit plus a torch and all necessary equipment to get your weld production up, running and automated. It is supplied complete with the robot arm which spans 1.72m in reach and can be installed on the ground or upside down. The package also contains the robot controller, teach pendant and cables. With a larger work envelope than its sister the RH14-10, it is nearly as fast as the RH14-10 but has a larger 20kg payload which makes it perfect for welding, cutting, assembly, handling, marking or even grinding applications! The key impressive feature here is that the robot body contains an internal dual-circuit flexible and resilient gas pipe which allows superb flexibility and excellent reach whilst welding those hard-to-reach seams.

The teach pendant provides a user-friendly, visual operation interface to enable easy robot programming.

Integrated with enough digital outputs and inputs to get your weld production automated, the robot comes with a 5000W built-in 3-phase transformer and a 3 -3-phase filter to ensure no electromagnetic interference to its weld application.

For more details see the video below

Note: Robot installation must be away from flammable or corrosive liquids or gases, electrical sources of interference