bennypass.com - Panasonic TAWERS Series

Panasonic TAWERS Series - TM-1400WGⅢ (Giappone)

tecnovi tec rh14 10w

Description

The Panasonic TM 1400 Welding Robot combines the existing benefits of Panasonic's TA and TB systems. The new mechanism allows the torch to be used both internally and externally depending on the customer’s needs.

Because of the very high speed applied in each of the six axis, the TM 1400 is currently considered the fastest welding robot in the world.

The TM 1400 can be delivered with the Cyber-weld System that is fully integrated into the welding power source and the robot controller. Another advantage is the “Weld Navigation” system that allows a very easy setup of the welding parameters.

Characteristics

Type	Robotic Arm TM-1400
Number of axes	6 axes
Function	Arc Welding
Mounting	Floor/Wall/Ceiling mount (Ceiling mount type is a special specification.)
Intended use	Arc Welding
Type of protection	IP54/IP67(The fifth and sixth axes are optional)
Other characteristics	Weld Navigation: Allows easy parameter setting (Easy setting with Teach Pendant) NoWeld Navigation: Recalculates weld current and voltage according to the changes. WGIII Controller with high-performance (Compared to the conventional model, 6 times faster main CPU and 4 times more memory capacity reduce start-up time by 50 % to about 30 seconds). Greatly reduces spatter in mixed gas (MAG) welding on thin plates (Welding waveform control achieves low spatter in short-circuit transfer range. Reduces spatter by up to 75 % using inexpensive CO2 gas (MTS control added to SP-MAG technology reduces spatter of CO2 welding). Achieves high-speed pulsed welding (Preventing undercuts during high-speed welding. Dip (Short circuit) Dip (Short circuit) transfer enables lower heat input with better gap handling capability. Precisely controlled dip timing reducing spatter.
Payload	6 kg (13.22 lb)
Action Range	1437 mm
Repeatability	±0.08mm
Operating temperature	Min.: 0 °C (41 °F) Max.: 45 °C (158 °F)
Weight	--
Drive system	Electric servo drive by AC servo motor
Motion range (°)	--
Maximum speed (°/s)	Axis 1: 225º/s (RT Rotating trunk) Axis 2: 225º/s (UA Upper arm) Axis 3: 225º/s (FA Forearm) Axis 4: 425º/s (RW Rotating wrist) Axis5: 425º/s (BW Bending wrist) Axis6: 629º/s (TW Twisting wrist)
Allowable Torque	--
Allowable load inertia at wrist	--
Robot mass	170 kg (374.786 lb)
Relative humidity	20 - 80%
Vibration	--

Click here for the datasheet

Conclusion

Refurbished used Panasonic robot TM 1400 is a specialized Welding Robot. This series is known for being the all-new and unique generation of robots. Customers can decide freely whether to use an externally or internally mounted torch cable to match the requirements of their applications. This refurbished used robot has an extremely strong arm structure. Additionally, an improved and efficient servo motor, which provides an enhanced harmonious movement for the positioning of the welding torch. Because of the high-resolution encoder working and a strong arm, the TM robots provide improved path accuracy. With the specialized configuration, the refurbished used TM robot fits optimally the requirements of a flexible and efficient welding process. TM 1400 is very famous in the used robot market as a Used Welding Robot for the most effective service. Even though the Panasonic TM robots are used specifically for welding applications, they are still equally good in material handling and other work.

For more details please see the video Below

Recommendations: Robot installation must be away from flammable or corrosive liquids or gases, electrical sources of interference

About

Our Services

Marketing Materials

Marketing Materials1