1003 Series Hammer Union

1003 is a Misaligning Union designed for systems in which piping alignment is a problem and needs up to a 71/2° angular adjustment from the center (15° total). Maxiumum working pressures must be not exceed 10000 PSI NSCWP.

Feature

• Sizes: 3” – 5”
• Pressure: 3” rated at 10,000 PSI NSCW
• 4” and 5” rated at 7,500 PSI NSCWP
• End Connections: Butt Weld (sch XXH)
• O-Ring on Male Sub
• Up to 7 1/2° angular adjustment from center (15° total)

Recommend service: For high-pressure connections where lines cannot be aligned.
Features: Ball seat provides positive seal with up to 71/2° misalignment; 2-inch model up to 4°, Replacement O-ring on male sub provides primary seal, and protects metal-to-metal seal against abrasion and corrosion, Available with threaded or butt-weld ends.

Hammer Union – Figure 1003 Specification