207 Series Hammer Union

 207 Series is blanking union which contains a Buna-N o-ring seal in the blanking cap to provide an efficient and dependable closure. The female sub is interchangeable with Figure 200 and 206 male sub and nut. 

Feature

• Sizes: 3”, 4”, and 6″
• Pressure: 2000 PSI NSCWP
• End Connections: Threaded, Butt Weld
• Butt Weld Schedules: 40 (Std), 80 (XH)
• BUNA-N o-ring on blanking cap

Recommended service: To seal manifold connections and protect union threads.
Features: Parts are interchangeable with Figs. 200 and 206, O-ring on blanking cap ensures a leak-free seal, Raised lugs on cap allow for make-up with a hammer, Available in butt-weld, Cap can be tapped for pressure gauge if specified.