bennypass.com - AS 2129* STEEL WELDING NECK FLANGES1

AS 2129* STEEL WELDING NECK FLANGES

NECK3 TABLE D DIMENSIONS (mm)

Size		Pipe Outside Diam.	Flange		Raised Face†		Bolting Details			Flange Thickness **	Net Weight
Size		Pipe Outside Diam.	Inside Diam.	Outside Diam.	Diam.	Thickness	Pitch Circle Diam.	Number of Holes	Diam. of Holes	FF & RF	RF†	FF
mm	inch	mm	B1	D	F	fl	P	N	V	T6	Kg	Kg
15	1/2	21.34	22.30	95.00	47.00	1.60	67.00	4	14.00	12.00	0.18	0.24
20	3/4	26.67	27.60	100.00	53.00	1.60	73.00	4	14.00	12.00	0.20	0.26
25	1	33.40	34.50	115.00	65.00	1.60	83.00	4	14.00	12.00	0.27	0.35
32	11/4	42.16	43.10	120.00	67.00	1.60	87.00	4	14.00	12.00	0.34	0.43
40	11/2	48.26	49.50	135.00	78.00	1.60	98.00	4	14.00	12.00	0.44	0.55
50	2	60.33	61.90	150.00	90.00	1.60	114.00	4	18.00	12.00	0.73	0.86
65	21/2	73.03	74.60	165.00	103.00	1.60	127.00	4	18.00	12.00	0.85	1.00
80	3	88.90	90.60	185.00	122.00	1.60	146.00	4	18.00	12.00	1.35	1.52
100	4	114.30	116.00	215.00	154.00	1.60	178.00	4	18.00	12.00	1.73	1.94
125	5	141.30	143.70	255.00	186.00	1.60	210.00	8	18.00	13.00	3.07	3.35
150	6	168.28	170.60	280.00	211.00	1.60	235.00	8	18.00	13.00	3.86	3.98
175	7			304.80		1.60	260.35	8	18.00		7.98	8.12
200	8	219.08	221.40	335.00	268.00	1.60	292.00	8	18.00	13.00	4.49	4.86
225	9			358.77		1.60	323.85	8	18.00			11.30
250	10	273.05	276.30	405.00	328.00	1.60	356.00	8	22.00	16.00	7.75	8.27
300	12	323.85	327.10	455.00	378.00	1.60	406.00	12	22.00	19.00	10.46	11.04
350	14	355.60	359.10	525.00	438.00	1.60	470.00	12	26.00	22.00	18.05	18.79
375	15			550.00	463.00	1.60	495.00	12	26.00	22.00		43.01
400	16	406.40	410.40	580.00	489.00	1.60	521.00	12	26.00	22.00	20.80	21.68
450	18	457.20	461.70	640.00	532.00	1.60	584.00	12	26.00	25.00	27.86	29.03
500	20	508.00	513.00	705.00	609.00	1.60	641.00	16	26.00	29.00	38.74	39.88
550	22			760.00	637.00	1.60	699.00	16	30.00	29.00	118.97	119.30
600	24	609.60	615.90	825.00	720.00	1.60	756.00	16	30.00	32.00	55.14	56.60

NECK3

TABLE E DIMENSIONS (mm)

Size		Pipe Outside Diam.	Flange		Raised Face†		Bolting Details			Flange Thickness **	Net Weight
Size		Pipe Outside Diam.	Inside Diam.	Outside Diam.	Diam.	Thickness	Pitch Circle Diam.	Number of Holes	Diam. of Holes	FF & RF	RF†	FF
mm	inch	mm	B1	D	F	fl	P	N	V	T6	Kg	Kg
15	1/2	21.34	22.30	95.00	47.00	1.60	67.00	4	14.00	12.00	0.23	0.29
20	3/4	26.67	27.60	100.00	53.00	1.60	73.00	4	14.00	12.00	0.25	0.31
25	1	33.40	34.50	115.00	65.00	1.60	83.00	4	14.00	12.00	0.40	0.49
32	11/4	42.16	43.10	120.00	67.00	1.60	87.00	4	14.00	12.00	0.49	0.58
40	11/2	48.26	49.50	135.00	78.00	1.60	98.00	4	14.00	12.00	0.72	0.83
50	2	60.33	61.90	150.00	90.00	1.60	114.00	4	18.00	12.00	0.94	1.07
65	21/2	73.03	74.60	165.00	103.00	1.60	127.00	4	18.00	12.00	1.10	1.26
80	3	88.90	90.60	185.00	122.00	1.60	146.00	4	18.00	12.00	1.50	1.68
100	4	114.30	116.00	215.00	154.00	1.60	178.00	4	18.00	13.00	2.22	2.42
125	5	141.30	143.70	255.00	186.00	1.60	210.00	8	18.00	14.00	3.33	3.61
150	6	168.28	170.60	280.00	211.00	1.60	235.00	8	22.00	17.00	4.45	4.76
175	7			304.80		1.60	260.35	8	18.00
200	8	219.08	221.40	335.00	268.00	1.60	292.00	8	22.00	19.00	6.57	6.95
225	9			358.17		1.60	323.85	12	22.00	20.63
250	10	273.05	276.30	405.00	328.00	1.60	356.00	12	22.00	22.00	10.61	11.11
300	12	323.85	327.10	455.00	378.00	1.60	406.00	12	26.00	25.00	13.59	14.17
350	14	355.60	359.10	525.00	438.00	1.60	470.00	12	26.00	29.00	24.03	24.77
375	15			550.00	463.00	1.60	495.00	12	26.00	32.00
400	16	406.40	410.40	580.00	489.00	1.60	521.00	12	26.00	32.00	30.66	31.54
450	18	457.20	461.70	640.00	532.00	1.60	584.00	12	26.00	35.00	39.13	40.05
500	20	508.00	513.00	705.00	609.00	1.60	641.00	16	26.00	38.00	51.12	52.25
550	22			735.00	637.00	1.60	673.00	16	30.00	44.00
600	24	609.60	615.90	825.00	720.00	1.60	756.00	16	33.00	48.00	82.54	84.04

Raised face is optional. In regards to iron valves, AS2129 Table D & E are flat face. AS4087 specifies flat face to PN14, whilst PN16 is flat face in iron and raised face in ductile iron.
*AS2129 Standard is still in place but is outdated by AS4087 which incorporates PN equivalents but has adopted equivalent flanging and drilling dimensions. However due to the adopting of PN pressure ratings. AS4087 in some cases specifies a larger flange thickness. Refer Stell Flanges PN16/21/35 for AS4087. In terms of bolting compatibility between AS4087 and AS2129 flanges, table C, D, PN14 and PN16 are all the same. AS2129 Table E drilling whilst not adopted as part of AS4087, is the same pressure rating as PN14 and the same drilling as AS4087 PN14 and PN16 in all sizes up to 600NB except: 100NB, 250NB & 450NB. Also note that in sizes 50mm, 65mm, 80mm, 350mm, 400mm, 500mm the bolt hole size of the Table E is slightly larger than PN14 & PN16 but the PCD & flange O.D. is the same sizes. AS2129 Table F is the same drilling as AS4087 PN21. AS2129 Table H is the same drilling as AS4087 PN35.

**Flange thickness shown is for Steel plate flanges. For Cast Iron & Ductile Iron flange thickness for integrally flanged valves, etc., refer to flangie dimensions here.

About

Our Services

Marketing Materials

Marketing Materials1