bennypass.com - tube material

INCOLOY® Filler Metal 65 (ERNiFeCr-1)

Specification

INCOLOY Filler Metal 65 is used for gas-tungsten-arc welding of INCOLOY alloy 825 and other nickel-iron-chromium-molybdenum-copper alloys of similar composition. The weld metal is highly corrosion resistant, particularly in reducing chemicals such as sulfuric and phosphoric acids. INCOLOY Filler Metal 65 can also be used for depositing overlays on carbon and low alloy steels.

Specification Chart of INCOLOY® Filler Metal 65

Specifications	AWS A5.14 ERNiFeCr-1 (UNS N08065)
AWS	AWS A5.14
Class	ERNiFeCr-1
Available Diameters	0.030" (0.8mm) 0.035" (0.9mm) 0.040" (1.0mm) 0.045" (1.14mm) 0.047" (1.2mm) 0.062" (1.6mm) 0.093" (2.4mm) 0.125" (3.2mm)
Length	36" (915mm) 39” (1000mm)
Packaging (kg)	TIG 0.062" (1.6mm) x 39" (1000mm) : 5.0 Kg x Pack 0.093" (2.4mm) x 39" (1000mm) : 5.0 Kg x Pack MIG 0.035" (0.9mm): 15Kg x Spool 0.047" (1.2mm): 15Kg x Spool
Key Features	Used for welding of nickel-chromium-molybdenum- copper alloys. Also can be used to overlay cladding where a similar chemical composition is required.

INCOLOY® Filler Metal 65 Details

165L 825 (65) TIG A5.14 ERNiFeCr-1

152e 825 (65) MIG A5.14 ERNiFeCr-1

61mig1 825 (65) MIG A5.14 ERNiFeCr-1

Application of INCOLOY® Filler Metal 65

Used for welding of nickel-chromium-molybdenum-copper alloys.

INCOLOY® Filler Metal 65 Chemical Composition

AWS A5.14 ERNiFeCr-1 UNS N08065	Cr	Cu	Nb + Ta	S	Ni + Co	C	Mn	Si	P
	19.5- 23.5	1.5 - 3.0	--	0.03 max	38.0 - 46.0	0.05 max	1.0 max	0.50 max	0.03 max
	Fe	Zr	Ti	Co	Mo	AI	B	W	Other
	22.0 max	--	0.60 - 1.20	--	2.50 - 3.50	0.20 max	--	--	0.50 max

Ni = Nickel
Cr = Chromium
Mn = Manganese
TA = Tantalum
Nb = Niobium
Fe = Iron
Ti = Titanium
Si = Silicon
Cu = Copper
C = Carbon
P = Phosphorus
S = Sulfur
Co = Cobalt

For more symbols click here

Mechanical Properties of INCOLOY® Filler Metal 65

	Tensile Strength MPa (ksi)	Yield Strength MPa (ksi)	Elongation %
AWS Requirements	80 Ksi / 550 MPa typical	Not Speciﬁed	Not Speciﬁed
Typical Performance	80Ksi / 550 MPa	Not Speciﬁed	25%
Density g/cm3	Melting Point ℃	Electrical Resistivity μΩ-m	Permeability at 70°F (21°C) and 200 oersted (15.9 kA/m)
8.14 g/cm3	2500 - 2550 ℃	--	1.005

Typical Welding Parameters of INCOLOY® Filler Metal 65

Diameter		Process	Volt	Amps	Gas
1/16"	1.6mm	TIG	14 - 18	90 - 130	100% Argon
3/32"	2.4mm	TIG	15 - 20	120 - 175
1/8"	3.2mm	TIG	15 - 20	150 - 220
.035"	0.9mm	MIG	26 - 29	150 - 190	75% Argon + 25% Helium
.047"	1.2mm	MIG	28 - 32	180 - 220	75% Argon + 25% Helium
1/16"	1.6mm	MIG	29 -33	200 - 250	75% Argon + 25% Helium

Our Pricing list of INCOLOY® Filler Metal 65

Our Part No.	ERNiFeCr-1 Filler Metal 65 Details List	ERNiFeCr-1 Filler Metal 65 Price
M6512S	825 (65) MIG - AWS A5.14 ERNiFeCr-1 / 0.047" (1.20mm) Od - (15 Kg per spool) For welding alloy 825	US $ 178.00 x Kilogram US $ 2,670.00 x Spool
T6524S	825 (65) TIG - AWS A5.14 ERNiFeCr-1 / 0.093" (2.40mm) Od - Lenght 39" (1000mm) (4.54 Kg per Pack) For welding alloy 617	US $ 178.00 x Kilogram US $ 808.12 x Pack

Conclusion

ERNiFeCr-1 is used for TIG or MIG welding of Incoloy 825 and other nickel-chromium-molybdenum-copper alloys. Incoloy Filler Metal 65 can be also used to overlay cladding where a similar chemical composition is required.

INCOLOY® Filler Metal 65 suppliers

INCONEL® Filler Metal 617 (ERNiCrCoMo-1)

Specification

INCONEL Filler Metal 617 is used for gas-tungsten-arc and gas-metal-arc welding of INCONEL alloy 617. Because of the weld metal's high-temperature strength, oxidation resistance, and metallurgical stability, the filler metal is also used for joining various dissimilar high-temperature alloys. Examples are INCOLOY alloys 800HT and 803 and cast alloys such as HK-40, HP, and HP-45 Modified.

Specification Chart of INCONEL® Filler Metal 617

Specifications	AWS A5.14 ERNiCrCoMo-1 (UNS N06617)
AWS	AWS A5.14
Class	ERNiCrCoMo-1
Available Diameters	0.030" (0.8mm) 0.035" (0.9mm) 0.040" (1.0mm) 0.045" (1.14mm) 0.047" (1.2mm) 0.062" (1.6mm) 0.093" (2.4mm) 0.125" (3.2mm)
Length	36" (915mm) 39” (1000mm)
Packaging (kg)	TIG 0.062" (1.6mm) x 39" (1000mm) : 5.0 Kg x Pack 0.093" (2.4mm) x 39" (1000mm) : 5.0 Kg x Pack MIG 0.035" (0.9mm): 15Kg x Spool 0.047" (1.2mm): 15Kg x Spool
Key Features	For welding of nickel-chrome-cobalt-molybdenum alloys to themselves as well as dissimilar metals such as stainless, carbon or low alloy steels. Also be used for overlay welding where a similar chemical composition is desired. The weld metal provides optimum strength and oxidation resistance from 1500°F (815°C) up to 2100°F (1150°C).

INCONEL® Filler Metal 617 Details

165L 617 TIG A5.14 ERNiCrCoMo-1

152e 617 MIG A5.14 ERNiCrCoMo-1

61mig1 617 MIG A5.14 ERNiCrCoMo-1

Application of INCONEL® Filler Metal 617

ERNiCrComo-1 finds extensive application across various industries, playing a crucial role in ensuring the integrity and safety of welded components. Some prominent applications include:

Aerospace Industry: ERNiCrComo-1 is employed in the manufacturing of aircraft engine components, gas turbine blades, and other critical parts where high-temperature resistance and corrosion protection are essential.
Petrochemical Industry: This alloy is widely used in the construction of pipelines, heat exchangers, and reactors for carrying and processing corrosive materials in petrochemical plants.
Marine Industry: ERNiCrComo-1 is utilized in marine environments to fabricate components for ships, offshore platforms, and underwater structures, providing long-lasting protection against seawater-induced corrosion.
Power Generation: In the power generation sector, ERNiCrComo-1 is favoured for fabricating boilers, superheaters, and heat exchangers that withstand high temperatures and corrosive conditions.

INCONEL® Filler Metal 617 Chemical Composition

AWS A5.14 ERNiCrCoMo-1 UNS N06617	Cr	Cu	Nb + Ta	S	Ni	C	Mn	Si	P
	20 - 24	0.50 max	--	0.015 max	Remainder	0.05 - 0.15	1.0 max	1.0 max	0.03 max
	Fe	Zr	Ti	Co	Mo	AI	B	W	Other
	3.0 max	--	0.60 max	10 - 15	8.0 - 10.0	0.80 - 1.50	--	--	0.50 max

Ni = Nickel
Cr = Chromium
Mn = Manganese
TA = Tantalum
Nb = Niobium
Fe = Iron
Ti = Titanium
Si = Silicon
Cu = Copper
C = Carbon
P = Phosphorus
S = Sulfur
Co = Cobalt

For more symbols click here

Mechanical Properties of INCONEL® Filler Metal 617

	Tensile Strength MPa (ksi)	Yield Strength MPa (ksi)	Elongation %
AWS Requirements	90 Ksi / 620 MPa typical	Not Speciﬁed	Not Speciﬁed
Typical Performance	112Ksi / 770 MPa	89Ksi / 610 MPa	28%
Density g/cm3	Melting Point ℃	Electrical Resistivity μΩ-m	------
8.36 g/cm3	2430 - 2510 ℃	1.22

Typical Welding Parameters of INCONEL® Filler Metal 617

Diameter		Process	Volt	Amps	Gas
.047"	1.2mm	TIG	13 - 16	80 - 110	100% Argon
1/16"	1.6mm	TIG	14 - 18	90 - 130
3/32"	2.4mm	TIG	15 - 20	120 - 175
1/8"	3.2mm	TIG	15 - 20	150 - 220
.047"	1.2mm	MIG	28 - 32	180 - 220	75% Argon + 25% Helium
1/16"	1.6mm	MIG	29 -33	200 - 250	75% Argon + 25% Helium

Our Pricing list of INCONEL® Filler Metal 617

Our Part No.	ERNiCrCoMo-1 Filler Metal 617 Details List	ERNiCrCoMo-1 Filler Metal 82 Price
M61709S	617 MIG - AWS A5.14 ERNiCrCoMo-1 / 0.035" (0.9mm) Od - (15 Kg per spool) For welding alloy 617	US $ 284.00 x Kilogram US $ 4,260.00 x Spool
M61712S	617 MIG - AWS A5.14 ERNiCrCoMo-1 / 0.047" (1.20mm) Od - (15 Kg per spool) For welding alloy 617	US $ 276.00 x Kilogram US $ 4,140.00 x Spool
T61716S	617 TIG - AWS A5.14 ERNiCrCoMo-1 / 0.062" (1.60mm) Od - Lenght 39" (1000mm) (5 Kg per Pack) For welding alloy 617	US $ 286.00 x Kilogram US $ 1,298.00 x Pack
T61724S	617 TIG - AWS A5.14 ERNiCrCoMo-1 / 0.093" (2.40mm) Od - Lenght 39" (1000mm) (5 Kg per Pack) For welding alloy 617	US $ 274.00 x Kilogram US $ 1,243.00 x Pack

Conclusion

ERNiCrComo-1 stands out as a versatile and reliable welding alloy, offering exceptional mechanical strength and corrosion resistance across a broad spectrum of industries. Its unique composition and robust properties make it an ideal choice for critical applications where weld integrity and performance are paramount. As technology and engineering continue to advance, ERNiCrComo-1 will undoubtedly maintain its significance as an advanced welding alloy, meeting the stringent demands of modern industrial applications.

INCONEL® Filler Metal 617 suppliers

INCONEL® Filler Metal 82 (ERNiCr-3 )

Specification

INCONEL Filler Metal 82 is used for gas-tungsten-arc, gas-metal-arc and submerged-arc welding of INCONEL alloys 600, 601 and 690, INCOLOY alloys 800 and 800HT, and submerged arc groove welding with this wire. For submerged-arc surfacing INCOFLUX NT100 is suitable.

Specification Chart of INCONEL® Filler Metal 82

Specifications	AWS A5.14 ERNiCr-3 (UNS N06082)
AWS	AWS A5.14
Class	ERNiCr-3
Available Diameters	0.030" (0.8mm) 0.035" (0.9mm) 0.040" (1.0mm) 0.045" (1.14mm) 0.047" (1.2mm) 0.062" (1.6mm) 0.093" (2.4mm) 0.125" (3.2mm)
Length	36" (915mm) 39” (1000mm)
Packaging (kg)	TIG 0.062" (1.6mm) x 39" (1000mm) : 5.0 Kg x Pack 0.093" (2.4mm) x 39" (1000mm) : 5.0 Kg x Pack MIG 0.035" (0.9mm): 15Kg x Spool 0.047" (1.2mm): 15Kg x Spool
Top Features	Used for welding Ni-Cr-Fe alloys and for overlay cladding in high-temperature application
Key Features	For welding of base materials such as ASTM B163, B166, B167 and B168 – alloys which have UNS Number N06600. Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family. Also be used for dissimilar welding applications between various nickel alloys and stainless or carbon steels, as well as for overlay.

INCONEL® Filler Metal 82 Details

165L 82M TIG AWS A5.14 ERNiCr-3

152e 82M MIG AWS A5.14 ERNiCr-7

61mig1 82M MIG AWS A5.14 ERNiCr-7

Application of alloy 82 wire

Alloy 82 wire, also known as Inconel 82 wire, finds various applications in industries where high-temperature strength, corrosion resistance, and reliable weldability are required. Some common applications of Alloy 82 wire include:

Aerospace Industry: Alloy 82 wire is used in aerospace applications, such as welding components in gas turbine engines, where the material needs to withstand high temperatures and corrosive environments.
Chemical Processing: Due to its excellent corrosion resistance, Alloy 82 wire is employed in chemical processing plants for welding pipes, fittings, and equipment exposed to aggressive chemical substances.
Power Generation: In the power generation industry, Alloy 82 wire is utilized to weld components in boilers, heat exchangers, and other equipment that experience high temperatures and various corrosive elements.
Nuclear Power Plants: Alloy 82 wire is suitable for welding nuclear reactor components, where resistance to corrosion and radiation is critical.
Oil and Gas Industry: The wire is used in the oil and gas sector for welding equipment and components that are exposed to harsh and corrosive environments.
Petrochemical Industry: Alloy 82 wire finds applications in petrochemical plants for welding reactors, vessels, and other equipment used in chemical processes.
Heat Exchangers: Alloy 82 wire is employed to weld heat exchangers, as they need to endure elevated temperatures and resist corrosion.
Furnace Components: Due to its high-temperature strength and oxidation resistance, Alloy 82 wire is used to weld components in industrial furnaces and heaters.
Pipelines: Alloy 82 wire is utilized for welding pipelines, especially in regions where the pipeline may come into contact with corrosive materials or operate at high temperatures.
Aircraft Engine Components: Inconel 82 wire is employed in the welding of aircraft engine components that require high-temperature resistance and durability.
Automotive Exhaust Systems: Alloy 82 wire may be used for welding exhaust components in vehicles, as they encounter high temperatures and exposure to corrosive gases.
Offshore Platforms: In offshore applications, where equipment is exposed to harsh marine environments, Alloy 82 wire can be used for welding critical components.

INCONEL® Filler Metal 82 Chemical Composition

AWS A5.14 ERNiCr-3 UNS N06082	Cr	Cu	Nb + Ta	S	Ni + Co	C	Mn	Si	P
	18 - 22	0.50 max	2.0 - 3.0	0.015 max	67.0 min	0.10 max	2.5 - 3.5	0.50 max	0.030 max
	Fe	Zr	Ti	Co	Mo	AI	B	W	Other
	3.0 max	--	0.75 max	--	--	--	--	--	0.50 max

Ni = Nickel
Cr = Chromium
Mn = Manganese
TA = Tantalum
Nb = Niobium
Fe = Iron
Ti = Titanium
Si = Silicon
Cu = Copper
C = Carbon
P = Phosphorus
S = Sulfur
Co = Cobalt

For more symbols click here

Mechanical Properties of INCONEL® Filler Metal 82

	Tensile Strength MPa (ksi)	Yield Strength MPa (ksi)	Elongation %
AWS Requirements	80 Ksi / 550 MPa typical	Not Speciﬁed	Not Speciﬁed
Typical Performance	67Ksi / 460 MPa	38Ksi / 260 MPa	28%
Density g/cm3	Melting Point ℃	Electrical Resistivity μΩ-m	------
8.47 g/cm3	2470 - 2575 ℃	620

Typical Welding Parameters of INCONEL® Filler Metal 82

Diameter		Process	Volt	Amps	Gas
.047"	1.2mm	TIG	13 - 16	80 - 110	100% Argon
1/16"	1.6mm	TIG	14 - 18	90 - 130
3/32"	2.4mm	TIG	15 - 20	120 - 175
1/8"	3.2mm	TIG	15 - 20	150 - 220
.047"	1.2mm	MIG	28 - 32	180 - 220	75% Argon + 25% Helium
1/16"	1.6mm	MIG	29 -33	200 - 250	75% Argon + 25% Helium
3/32"	2.4mm	SAW	28 - 30	275-350	Suitable Flux may be used
1/8"	3.2mm	SAW	29 -32	350-450	Suitable Flux may be used
5/32"	4.0mm	SAW	30 - 33	400-550	Suitable Flux may be used

Our Pricing list of INCONEL® Filler Metal 82

Our Part No.	ERNiCr-3 Filler Metal 82 Details List	ERNiCr-3 Filler Metal 82 Price
M8209	82 MIG - AWS A5.14 ERNiCr-3 / 0.035" (0.9mm) Od - (15 Kg per spool) For welding alloys INCONEL 600 601, INCOLOY 800 800HT and INCO alloy 330	US $ 228.00 x Kilogram US $ 3,420.00 x Spool
M8212	82 MIG - AWS A5.14 ERNiCr-3 / 0.047" (1.20mm) Od - (15 Kg per spool) For welding alloys INCONEL 600 601, INCOLOY 800 800HT and INCO alloy 330	US $ 224.00 x Kilogram US $ 3,360.00 x Spool
T8216	82 TIG - AWS A5.14 ERNiCr-3 / 0.062" (1.60mm) Od - Lenght 39" (1000mm) (5 Kg per Pack) For welding alloys INCONEL 600 601, INCOLOY 800 800HT and INCO alloy 330	US $ 230.00 x Kilogram US $ 1,150.00 x Pack
T8224	82 TIG - AWS A5.14 ERNiCr-3 / 0.093" (2.40mm) Od - Lenght 39" (1000mm) (5 Kg per Pack) For welding alloys INCONEL 600 601, INCOLOY 800 800HT and INCO alloy 330	US $ 220.00 x Kilogram US $ 1,100.00 x Pack

Conclusion

Alloy 82 wire refers to a specific type of wire made from Alloy 82, which is a nickel-chromium-iron alloy commonly used in various industries, including nuclear power generation, petrochemical processing, and aerospace applications. Alloy 82, also known as Inconel 82, is a solid-solution-strengthened alloy that offers excellent corrosion resistance and high-temperature strength. It is particularly well-suited for welding applications, where it is used as a filler metal to join dissimilar alloys or provide corrosion resistance to the weld area. The wire made from Alloy 82 is available in various diameters and forms, such as spools or coils. It is used primarily for welding purposes, including welding of stainless steels, nickel-based alloys, and other high-temperature materials. When using Alloy 82 wire for welding, it is crucial to follow the recommended welding procedures, including proper pre-weld and post-weld heat treatment, to ensure the integrity and performance of the welded joints.

Welding Applications: Alloy 82 wire is commonly used in welding applications that involve joining or repairing components made of similar or dissimilar materials. It is often employed in the construction and maintenance of equipment for industries such as power generation, chemical processing, and oil and gas.
Corrosion Resistance: Alloy 82 exhibits excellent resistance to various corrosive environments, including those containing acids, alkalis, and seawater. This property makes it suitable for applications where corrosion resistance is crucial, such as in marine environments or chemical processing plants.
High-Temperature Strength: Another significant advantage of Alloy 82 is its ability to maintain its mechanical strength at elevated temperatures. It retains good strength and resistance to deformation even when exposed to high heat, making it suitable for applications involving extreme temperature conditions.
Compatibility: Alloy 82 wire is compatible with a wide range of base materials, including stainless steels, nickel-based alloys (such as Inconel and Monel), and carbon steels. It helps create strong, reliable welds while ensuring compatibility with the parent materials.

INCONEL® Filler Metal 82 suppliers

INCONEL® Filler Metal 72M (ERNiCr-7)

Specification

INCONEL Filler Metal 72M is used for the overlay cladding of ferrous materials used in high-temperature applications, and the welding of nickel-chromium-iron alloy (ASTM B163, B166, B167, and B168 having UNS number N06690) to itself, and to steels, and for welding IN657 and INCO clad 671/800H, using the GTAW, GMAW, and PAW processes. Welds made with this composition are particularly resistant to high-temperature oxidation, carburization, and sulfidation, and to reducing-subsidizing and metal dusting environments.

Specification Chart of INCONEL® Filler Metal 72M

Specifications	AWS A5.14 ERNiCr-7 (UNS N06073)
AWS	AWS A5.14
Class	ERNiCr-7
Available Diameters	0.030" (0.8mm) 0.035" (0.9mm) 0.040" (1.0mm) 0.045" (1.14mm) 0.047" (1.2mm) 0.062" (1.6mm) 0.093" (2.4mm) 0.125" (3.2mm)
Length	36" (915mm) 39” (1000mm)
Packaging (kg)	TIG 0.062" (1.6mm) x 39" (1000mm) : 5.0 Kg x Pack 0.093" (2.4mm) x 39" (1000mm) : 5.0 Kg x Pack MIG 0.035" (0.9mm): 15Kg x Spool 0.047" (1.2mm): 15Kg x Spool
Top Features	Used for welding Ni-Cr-Fe alloys and for overlay cladding in high-temperature application
	------------

INCONEL® Filler Metal 72M Details

165L 72M TIG AWS A5.14 ERNiCr-7

152e 72M MIG AWS A5.14 ERNiCr-7

61mig1 72M MIG AWS A5.14 ERNiCr-7

INCONEL® Filler Metal 72M Chemical Composition

AWS A5.14 ERNiCr-7 UNS N06073	Cr	Cu	Nb + Ta	S	Ni	C	Mn	Si	P
	36 - 39	0.30	0.25 - 1.0	0.015	5.5	0.03	0.50	0.30	0.02
	Fe	Zr	Ti	Co	Mo	AI	B	W	Other
	1.0	0.02	0.25 - 0.75	1.0	0.50	0.75 - 1.20	0.003	--	0.50 max

Ni = Nickel
Cr = Chromium
Mn = Manganese
TA = Tantalum
Nb = Niobium
Fe = Iron
Ti = Titanium
Si = Silicon
Cu = Copper
C = Carbon
P = Phosphorus
S = Sulfur
Co = Cobalt

For more symbols click here

Mechanical Properties of INCONEL® Filler Metal 72M

	Tensile Strength MPa (ksi)	Yield Strength MPa (ksi)	Elongation %
AWS Requirements	100 Ksi / 690 MPa typical	Not Speciﬁed	30 %
Typical Performance	Not Speciﬁed	Not Speciﬁed	Not Speciﬁed
Density g/cm3	Melting Point ℃	Electrical Resistivity μΩ-m	------
8.19 g/cm3	1343 - 1377℃	--

Typical Welding Parameters of INCONEL® Filler Metal 72M

Diameter		Process	Volt	Amps	Gas
.047"	1.2mm	TIG	13 - 16	80 - 110	100% Argon
1/16"	1.6mm	TIG	14 - 18	90 - 130
3/32"	2.4mm	TIG	15 - 20	120 - 175
1/8"	3.2mm	TIG	15 - 20	150 - 220
.047"	1.2mm	MIG	28 - 32	180 - 220	75% Argon + 25% Helium
1/16"	1.6mm	MIG	29 -33	200 - 250	75% Argon + 25% Helium
3/32"	2.4mm	SAW	28 - 30	275-350	Suitable Flux may be used
1/8"	3.2mm	SAW	29 -32	350-450	Suitable Flux may be used
5/32"	4.0mm	SAW	30 - 33	400-550	Suitable Flux may be used

Our Pricing list of INCONEL® Filler Metal 72M

Our Part No.	ERNiCrMo-3 Filler Metal 625 Details List	ERNiCrMo-3 Filler Metal 625 Price
M62509S12	72M MIG - AWS A5.14 ERNiCr-7 / 0.035" (0.9mm) Od - (15 Kg per spool)	Not available
M62512S12	72 MIG - AWS A5.14 ERNiCr-7 / 0.047" (1.20mm) Od - (15 Kg per spool)	Not available
T6251612	72 TIG - AWS A5.14 ERNiCr-7 / 0.062" (1.60mm) Od length 39" (1000mm) (5 Kg per pack)	Not available
T6252412	72 TIG - AWS A5.14 ERNiCr-7 / 0.093" (2.40mm) Od length 39" (1000mm) (5 Kg per pack)	Not available

INCONEL® Filler Metal 72M suppliers

INCONEL® Filler Metal 52 MIG and TIG (ERNiCrFe-7)

Specification

INCONEL Filler Metal 52 (ERNiCrFe-7) Nickel-Chromium-Iron Alloy Welding Wire is mainly used for TIG welding of Inconel alloy 690. The metal cladding has a good overall performance, radiation, and pure water environment with excellent resistance to stress corrosion cracking. This alloy wire could be used for anti-corrosion, anti-oxidizing acid corrosion surfacing layer on low alloy steel, and welding dissimilar metals.

The applications include surface as well as clad side welding. Interpass temperature of 150℃ should be respected. It was developed to meet the changing needs of the nuclear industry, with the higher chromium level providing greater resistance to stress-corrosion cracking in the nuclear, pure water environment. The Wire performs better resistance to weld solidification and weld-metal liquation cracking against other nickel-based filler metals.

Specification Chart of INCONEL® Filler Metal 52

Specifications	AWS A5.14 ERNiCrFe-7 (UNS N06052)
AWS	AWS A5.14
Class	ERNiCrFe-7
Available Diameters	0.030" (0.8mm) 0.035" (0.9mm) 0.040" (1.0mm) 0.045" (1.14mm) 0.047" (1.2mm) 0.062" (1.6mm) 0.093" (2.4mm) 0.125" (3.2mm)
Length	36" (915mm) 39” (1000mm)
Packaging (kg)	TIG 0.062" (1.6mm) x 39" (1000mm) : 5.0 Kg x Pack 0.093" (2.4mm) x 39" (1000mm) : 5.0 Kg x Pack MIG Spool 0.035" (0.9mm): 15Kg x Spool 0.047" (1.2mm): 15Kg x Spool Reels And Coils 0.035" (0.9mm): 27Kg x coil 0.047" (1.2mm): 27Kg x coil
Top Features	With high yield strength and strong tensile strength Prevents ductility and impact toughness from decreasing. High level of stress corrosion cracking resistance

INCONEL® Filler Metal 52 Details

165L 52 TIG - AWS A5.14 ERNiCrFe-7

152e 52 MIG - AWS A5.14 ERNiCrFe-7

52c 52 MIG - AWS A5.14 ERNiCrFe-7

INCONEL® Filler Metal 52 Applications

Our Nickel TIG Welding Wire is the ideal choice for various applications, including but not limited to

Chemical and Petrochemical Equipment
Aerospace and Aviation Components
Marine and Offshore Structures
Power Generation Plants
Oil and Gas Industry Equipment
Seawater Desalination Systems
Heat Exchangers and Reactors

INCONEL® Filler Metal 52 Chemical Composition

AWS A5.14 ERNiCrFe-7 UNS N06052	Cr	Cu	Nb + Ta	S	Ni + Co	C	Mn	Si	P
	28.0 - 31.5	0.30 max	0.10 max	0.015 max	Remainder	0.04 max	1.0 max	0.50 max	0.02 max
	Fe	Ta	Ti	Co	Mo	AI	AI + Ti	W	Other
	7.0 - 11.0	--	1.0 max	--	0.50 max	1.10 max	1.5 max	--	0.50 max

Ni = Nickel
Cr = Chromium
Mn = Manganese
TA = Tantalum
Nb = Niobium
Fe = Iron
Ti = Titanium
Si = Silicon
Cu = Copper
C = Carbon
P = Phosphorus
S = Sulfur
Co = Cobalt

For more symbols click here

Mechanical Properties of INCONEL® Filler Metal 52

	Tensile Strength MPa (ksi)	Yield Strength MPa (ksi)	Elongation %
AWS Requirements	80 Ksi / 552 MPa typical	Not Speciﬁed	Not Speciﬁed
Typical Performance	Not Speciﬁed	Not Speciﬁed	32 %
Density g/cm3	Melting Point ℃	Electrical Resistivity μΩ-m	------
8.19 g/cm3	1330-1380℃	1.148

Typical Welding Parameters of INCONEL® Filler Metal 52

Diameter		Process	Volt	Amps	Gas
.047"	1.2mm	TIG	13 - 16	80 - 110	100% Argon
1/16"	1.6mm	TIG	14 - 18	90 - 130
3/32"	2.4mm	TIG	15 - 20	120 - 175
1/8"	3.2mm	TIG	15 - 20	150 - 220
.047"	1.2mm	MIG	28 - 32	180 - 220	75% Argon + 25% Helium
1/16"	1.6mm	MIG	29 -33	200 - 250	75% Argon + 25% Helium
3/32"	2.4mm	SAW	28 - 30	275-350	Suitable Flux may be used
1/8"	3.2mm	SAW	29 -32	350-450	Suitable Flux may be used
5/32	4.0mm	SAW	30 - 33	400-550	Suitable Flux may be used

Our Pricing list of INCONEL® Filler Metal 52

Our Part No.	AWS A5.7 ERNiCrFe-7 Filler Metal 52 Price List	ERNiCrFe-7 Inconel Filler Metal 52 Price
M6709AB	52 MIG - A5.14 ERNiCrFe-7 / 0.035" (0.9mm) Od For welding copper-nickel alloys 90/10, 80/20 and 70/30 (15 Kg per spool)	US $ 58.00 x Kilogram US $ 870.00 x Spool
M6712AB	52 MIG - A5.14 ERNiCrFe-7 / 0.047" (1.20mm) Od For welding copper-nickel alloys 90/10, 80/20 and 70/30 (15 Kg per spool)	US $ 51.00 x Kilogram US $ 765.00 x Spool
T6716AB	52 TIG - A5.14 ERNiCrFe-7 / 0.035" (0.9mm) Od For welding copper-nickel alloys 90/10, 80/20 and 70/30 (5 Kg per pack)	US $ 57.00 x Kilogram US $ 285.00 x Pack
T6724AB	52 TIG - A5.14 ERNiCrFe-7 / 0.093" (2.40mm) Od For welding copper-nickel alloys 90/10, 80/20 and 70/30 (5 Kg per pack)	US $ 53.00 x Kilogram US $ 265.00 x Pack

Conclusion

Unrivalled Corrosion Resistance: the Nickel TIG Welding Wire is formulated with a precise blend of nickel and alloying elements, giving it unparalleled resistance to corrosion in challenging environments. Whether your welding projects involve chemicals, acids, or seawater exposure, this welding wire ensures your welds remain robust and dependable.
High Purity and Cleanliness: This attribute reduces the risk of impurities in your welds, preventing defects and ensuring optimal mechanical properties in the finished joints.
Versatility in Applications: Our Nickel TIG Welding is suitable for a wide range of applications across various industries. From chemical processing equipment to aerospace components, this welding wire is the go-to solution for critical welding projects.
Consistent Weld Quality: With Nickel TIG Welding Wire, you can count on consistent weld quality and performance. The wire’s uniform composition and controlled manufacturing process guarantee welds with exceptional strength, ductility, and resistance to stress corrosion cracking.

INCONEL® Filler Metal 52 suppliers

About

Our Services

Marketing Materials

Marketing Materials1