Buy in our Shop - On this site you can find everything you need to complete your project. We are a experts team with high level of technical expertise.
The MTL 4500 series works by providing an intrinsically safe (IS) interface between a control system in a safe area and a field device in a hazardous area. It uses galvanic isolation and energy limitation techniques, such as limiting current and voltage, to prevent the energy in the circuit from reaching a level that could cause an explosion. The key principle is to keep the energy in the hazardous area circuits below the point of ignition, ensuring safety in potentially explosive environments.
The MTL4500 Isolator are the direct replacement with MTL4000 Series. Consider that MTL4000 are obsolate
Eaton MTL 4500 Series - Switch Proximity Detector / Part number MTL4511 /Line fault detection (LFD) (when selected) / Voltage applied to sensor: 7 to 9V dc from 1kΩ ±10% / Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors (NAMUR)MUR)
Eaton MTL 5500 Series - RESISTANCE ISOLATOR to repeat RTD signals / Part number MTL5582B/ Output range: 10Ω to 400Ω (from a 100μA to 5mA source) / Resistance source: 2-, 3-, or 4-wire* RTDs to BS 1904/DIN 43760 (100Ω at 0°C)
Eaton MTL 5500 Series - transmitter repeater, passive input, current sink / Part number MTL5541/S/ Maximum voltage source: 24V dc / Communications supported: HART (terminals 1 & 2 only)
Eaton MTL 5000 Series - repeater power supplies / Part number MTL5041/S/ Output current: 4 to 20mA / Channel 1voltage (terminal 2 with respect to terminal 1): >16.5V
Eaton MTL 5500 Series - SWITCH/ PROXIMITY DETECTOR INTERFACEs/ Part number MTL5516C/ Voltage applied to sensor: 7 to 9V dc from 1kΩ ±10% / two-channel, with line fault detection
Eaton MTL 5500 Series - REPEATER POWER SUPPLY/ Part number MTL5544/ Maximum voltage source: 24V / Current sink:600Ω max. / 2-channel, 4/20mA, HART®, 2- or 3- wire transmitters
Eaton MTL 5500 Series - ISOLATING DRIVER/ Part number MTL5549Y/ Output resistance: > 1MΩ/ Digital signal bandwidth: 500Hz to 10kHz /Communications supported: Hart
Eaton MTL 5500 Series - VIBRATION TRANSDUCER INTERFACE/ Part number MTL5531/ Signal range: >Minimum –20V, maximum –0.5V /Safe-area output impedance: <20Ω
Eaton MTL 5500 Series - PULSE ISOLATOR/ Part number MTL5532/ Signal range: >Alarm output: ON in alarm, 0.5A @ 35Vdc max. /Safe-area current output: Input capture delay: 2 signal periods (5ms min.) / (pulse & 4/20mA current outputs)
Eaton MTL 5500 Series - TEMPERATURE CONVERTER (THC or RTD input)/ Part number MTL5573/ Inputs: Pt 100 - RTD ± 80mΩ /Span: 250Ω) / Calibration accuracy (at 20°C)
Eaton MTL 5000 Series - SWITCH/ PROXIMITY DETECTOR INTERFACE/ Part number MTL5018/ single-pole relay twochannel
switch/proximity detector with phase reversal (Discontinued, use)
Eaton MTL 5000 Series - SWITCH/ PROXIMITY DETECTOR INTERFACE/ Part number MTL5017/single-pole relay two channel
switch/proximity detector with line fault detection and phase reversa
Eaton MTL 7000 Series - Analog Input/Output (high level) - / Part number MTL7787/Transmitters, 2-wire, 4/20mA
Eaton MTL 7000 Series - Analog Input/Output (high level) - / Part number MTL7706 /Transmitters, 2-wire, 4/20mA













Deal With bennypass and
Get More Valuable Services
Relying on people with a high technical level and experience can make
a significant difference in a project, especially when reducing costs has
become a priority for all Oil and Gas companie.
For Business: For Business inquiry pls fill our feedback form and
Troll Free Number – (+39)347-051-5328.

We offer the best and economical solutions, backed by 27+ years of experience and international standards knowledge, echnological changes, and industrial systems.